rusty small problem need some help - Page 2

ajf · 01-12-2007, 10:12 PM

o oh yea and i think the pipe might actualy help wen i take big jumps and hold the shock towers from poping loose like they sometimes do

modman · 01-12-2007, 10:31 PM

I guess its ok but just don't roll over on that or they will snap rigth off.

zueslilbuddy · 01-13-2007, 01:46 AM

Man let me know how high you needed to go.
I have some 90 degree mounts i'll send you for just $1.50 shipped that would look better.

one85_db · 01-13-2007, 01:57 AM

I used ABS on my rear shock tower to make an intake/scoop. It is very strong but i had to brace the whole thing with a metal bar to prevent the 90 degree bend in the abs from bending. I'll post some pictures...

one85_db · 01-13-2007, 02:17 AM

By the way your welcome I'm glad i could help. ABS is sometimes flimsy you can probably make a brace out of abs if you wanted, you can use a wood file and some superglue with the abs. Make a vertical part inside the bend of the abs brackets that you just made. Just remember that if need be you can use a heat gun or a lighter or even a blow torch to add a little heat to ABS and bend it.