TrxNewbie21

Hey guys!
Well this past weekend i bashed my truck pretty good but no damage but i had a blast. First i started with doing a bunch of high speed passes and tuning, then i started driving up a tree and jumping off it, then finally i pulled out "The Big Jump" and had the best time ever. The jump angles almost straight up! Its shaped like Mis' jump on his site.(half pipe style) After a few minutes of this a family of 4 climbed up a hill side that is pretty steep and surprised me they all made it up. There were two kids about 4ish and 6ish and the parents looked like mid 30s and they all loved watching me do backflips and attempt to do some front flips. The younger kid said "i have a green truck but i broked it" which was probably the coolest thing to come out of a 4 year olds mouth. haha. Then i finished the tanks off early because my Hump pack died and my spare could not be plugged in due to different plug.

The next day i decied i will take my maxx apart, switch my spur, switch clutch bell, mod the brake, re-dip my servos, and lastly try my failsafe out again.

I have a few pictures now but there will be more tomorrow night cause i'm waiting for my servos to dry.


Well Here it is!

*Before*
Maxx Before Rebuildation http://www1.snapfish.com/slideshow/A...45/t_=54260345

Maxx Before Rebuildation 2 http://www1.snapfish.com/slideshow/A...45/t_=54260345

*Removal*
Step 1 http://www1.snapfish.com/slideshow/A...45/t_=54260345

Step 2 http://www1.snapfish.com/slideshow/A...45/t_=54260345

Step 3 http://www1.snapfish.com/slideshow/A...45/t_=54260345

*Re-Proofing Electronics*
RX http://www1.snapfish.com/slideshow/A...45/t_=54260345

RX 2 http://www1.snapfish.com/slideshow/A...45/t_=54260345

Currents Servos http://www1.snapfish.com/slideshow/A...45/t_=54260345

Backside Current Servos http://www1.snapfish.com/slideshow/A...45/t_=54260345

Servos Undergoing Plastidipation http://www1.snapfish.com/slideshow/A...45/t_=54260345

*Chassis*
RC Raven Chassis Wiped Off http://www1.snapfish.com/slideshow/A...45/t_=54260345

Tranny, FOC, Mis' Mod, Spur http://www1.snapfish.com/slideshow/A...45/t_=54260345

*TRX 3.3*
3.3 Cleaned Up http://www1.snapfish.com/slideshow/A...45/t_=54260345

3.3 Cleaned Up 2 http://www1.snapfish.com/slideshow/A...45/t_=54260345

There will be more photos this weekend as i begin to rebuild it again. Thanks for looking!!!!

Thanks!
TRX21

TrxNewbie21

Well here is the 2nd part to my cleaning and building

I took the engine apart and cleaned it up a bit
Modded my brake
Switched spur
Dipped my servos
Re routed my tubes
Cleaned everything up


And now i'm waiting for:
2-pin Connectors (male and female)
Switch harness
Grey RX Box
RIT Dye
5mm and 3mm nuts
And a few of the essentials

well here are the pics..

*Maxx waiting to have a brain transplant.(RX)*
Maxx Waiting For More http://www1.snapfish.com/slideshow/A...45/t_=54260345

Maxx Waiting For More 2
The MIP sure looks shinney! http://www1.snapfish.com/slideshow/A...45/t_=54260345

*Grey Stuff*
Here are the Grey Parts Waiting For Dye http://www1.snapfish.com/slideshow/A...45/t_=54260345

*Pop's Maxx*
Needs an old guy to give it attention again!
Looks like it needs to be driven! http://www1.snapfish.com/slideshow/A...45/t_=54260345

Thanks!